Werkstätte Liechtblick Schaffhausen


WERKSTÄTTE LIECHTBLICK, SCHAFFHAUSEN


The challenge

We want to clad the main building, constructed in the 1960s or 1970s, with trapezoidal ALUCOBOND modules, some of which will be butt-jointed. The various angled ALUCOBOND trapezoidal modules should be mounted on and under each other in such a way that a joint pattern forms that runs all the way from the upper to the lower floor, interrupted by the rows of windows. The design should be realised as a rear-ventilated curtain façade and thus be free of thermal bridges.


The Ecolite solution

In order to achieve the prescribed requirements, a wide range of substructure systems were used in combination (KA, UB, etc.).


Ecolite products

The following Ecolite products were used:

Primary substructure made of Ecolite Thermo H brackets with angle profiles and T profiles. Secondary substructure consisting of a wide range of Ecolite substructure systems (KA, UB, etc.). ALUCOBOND elements with Z profiles provided to fix onto the primary and secondary substructure.


Bildgalerie

Liechtblick_01_1440x1012.png

Liechtblick_01_1440x1012.png

Liechtblick_27_1440x1012.jpg

Liechtblick_27_1440x1012.jpg

Liechtblick_08_1440x1012.jpg

Liechtblick_08_1440x1012.jpg

Liechtblick_19_1440x1012.jpg

Liechtblick_19_1440x1012.jpg

Liechtblick_11_1440x1012.png

Liechtblick_11_1440x1012.png

Click on a photo to see an enlarged view.
Photography: www.hanspeterschiess.ch

Login